100% Real CompTIA Network+ Certification Exams Questions & Answers, Accurate & Verified By IT Experts
Instant Download, Free Fast Updates, 99.6% Pass Rate.
Includes 670 Questions & Answers
Download Free CompTIA Network+ Practice Test Questions VCE Files
CompTIA Network+ Certification Exam Dumps & Practice Test Questions
Prepare with top-notch CompTIA Network+ certification practice test questions and answers, vce exam dumps, study guide, video training course from ExamCollection. All CompTIA Network+ certification exam dumps & practice test questions and answers are uploaded by users who have passed the exam themselves and formatted them into vce file format.
One of the smallest networks we have is a PAN, a personal area network. And the reason I say it's one of the smallest is that it only interconnects two devices, and technologies we might see here include things like infrared and Bluetooth. For example, if you have an infrared remote control that controls your smart TV, you're using a PAN via infrared. If you have a wireless gaming controller, you might be using Bluetooth to communicate with that gaming controller. You might also be using Bluetooth to communicate between your smartphone and a standalone speaker. And some characteristics I want you to know about a personal area network are that, by definition, it only interconnects two devices, and it's going to be over a fairly limited distance. Something like infrared even has to have a line of sight. If you have some obstruction in the middle, that infrared signal might not get through. Bluetooth might be able to go through some barriers, but it's still going to be over a fairly limited distance. and that's going to vary with your version of Bluetooth. But some versions of Bluetooth are limited to about 30 feet as far as distance, and the throughput is going to be somewhat limited. Alternatively, Bluetooth will allow you to stream fairly high-quality music streams these days. You're probably not going to be sending something like an 8-K video stream over Bluetooth, and certainly not over Infrared. And that's a look at a personal area network, or a PAN.
A network client such as a laptop does not necessarily have to connect into the network by physically plugging in an Ethernet cable to that client and then connecting the other end of the cable into an Ethernet switch. Instead, we may be able to use wireless networking technologies. That's what we've got here, a wireless LAN, or WLAN for short. The wireless client is going to communicate data over the airwaves using radio signals. And the access point has one or more internal antennas that will receive the radio signals from the wireless clients and convert those into corresponding Ethernet frames that it sends out to an Ethernet switch, which can get the client out to the rest of the world. And there are a few things I'd like you to know about the wireless lenses you see on screen. The first one is a wireless LAN, which adds flexibility and mobility for your clients. You might need to connect a device that isn't close to an Ethernet port. What do you do? Do you have to run an Ethernet cable to that location? Maybe not if that client supports wireless communication. You could just have that wireless client communicate with an access point within that access point's coverage area. So it's going to give you more flexibility. And you can even take this laptop with you as you walk around the building. You've got mobility while maintaining connectivity with the network. And the way this typically works is that we're going to have one or more access points that a client is going to communicate with. And in a large environment, maybe a large building, we will have multiple access points, and a client can move throughout the building, and things can be configured such that that client will automatically rehome with another access point that it's in closer proximity to at the moment without losing connectivity with the network. And that access point in the literature is often abbreviated as an AP. One concern we do have with wireless fans, though, is interference. After all, we're using radio waves. There are other things out there that use radio waves, and we want to minimise interference. In fact, we have a couple of major bands of radio frequencies. There are frequencies around the 2 and 4 GHz ranges within each of those ranges. We have different channels, and we should select channels to minimise interference from other devices nearby or in my home. For example, I'm near a military base, and they have radar. And my wireless access point periodically reports to me that it's detecting radar on this particular channel. Well, I know that I should avoid that channel when it comes to communicating wirelessly, so I can set my phone access point to a different channel. But that's just a look at wireless lenses.
One of the buzzwords we hear a lot in the industry these days is "software defined." We have SD-WAN software-defined networks, and we have software-defined access for security. And in this video, we're going to talk about software-defined wide area networks, or SDWAN technologies. On screen, we see a typical traditional Wan connection. We've got a data centre located at our headquarters. We've got a couple of branch offices, BR One and BR Two. And those branch offices are connecting back to HQ using a variety of WAN technologies. We've got MPLS; we've got Metro; we've got Ethernet. Other options exist as well. And because we've got these lines where maybe we can get a service level agreement from our service provider, we might be able to get predictable performance, and we might set up some sort of secure tunnel between the branch office and the headquarters so we can have predictable security. A potential downside, though, is if I'm at one of those branch office locations and I want to send traffic to the Internet, or maybe I want to receive traffic from the Internet, maybe we have some sort of security policy that says that traffic has to be inspected by the data center. So if I'm trying to get from BRONE to the Internet, maybe using a cable modem, I might have to do what is called backhauling. Here's what I mean. BR One wants to go to the Internet, but first it has to send traffic over to the data centre at HQ. Then, and only then, can it send traffic up to the Internet. That's not terribly efficient. That can add delay, which could cause bandwidth utilisation on the links going into the data center. The good news is we can overcome that and get some other benefits from modern-day SD-WAN connections. You see, one of the things that SDWayne considers is that applications are migrating from the data centre to the cloud. Just consider a few examples. We've got Amazon's AWS and Microsoft Azure. We've got Microsoft Office 365 in Dropbox. These are services that live in the cloud. We don't have to go to our data centre to access those. And a lot of these cloud-based applications have robust security built in. They allow us to communicate securely with them. And SDM can give us security. It can provide quality service and control the forwarding of packets through our network. If we have lots of routers, and we'll see this in a moment, we're actually going to take the responsibility of forwarding packets away from the routers and we're going to give it to an SD Wang controller. And because of this, BR One can go directly out to the Internet. Back hauling is no longer required. Now let's take a look under the hood to see how this is possible. One of the things that makes SDWAN so awesome is that we can have just about any physical infrastructure interconnecting our sites. It doesn't really matter. even though one site might be three router hops away from another site. We could make them virtually appear to be neighbors. We could form neighbouring ships and OSPF adjacencies that we're going to be talking about later in the course as if they were right next to each other. You see, this is the physical topology. Here is the virtual topology. This is called an SDWAN overlay. This virtual infrastructure has the router in the upper left connecting virtually directly to the router in the lower right. Now we can see from the physical infrastructure that that's not really happening. We're going through other routers, but logically we're not. Because of this SD-Wayne controller that you see here onscreen, it's in control of all of these routers. And in the background, it can dynamically set up a secure tunnel between those two routers so that they appear to be adjacent. And this is what we call intent-based networking. We take whatever physical infrastructure we have, and we say our intent is for these two routers to be neighbors. My intent is to have this level of quality of service, or QoS, for this type of traffic. Here's how I want to do security. And we put the SDWAN controller in charge of enforcing all of that. You see what's happening with an SDWAN controller. It is taking away the control plane function from our routers. We say that we're decoupling those control plane functions from the routers, where instead of a router making a forwarding decision based on an IP address, the forwarding decisions are made inside of the Sdwanc controller, and the physical connections making up the underlying network could be a variety of things. We don't have to be consistent and have MPLS everywhere. We can have a variety of technologies, such as cellular data using 4 G and 5 G. We can add the MPLS cable modems. We might have gigafiber, but that's transparent to the end user. We say that we are abstracting the physical infrastructure and creating the virtual infrastructure. And you might wonder, how is this possible? Don't the routers have control over quality of service and security? They do. But the good news is that the SDWAN controller can configure those routers for us. It can simultaneously send out appropriate configuration commands to all of those routers to make sure that we are consistent in our quality of service settings. We're consistent in the way we have security set up. We're consistent in our performance. And that's a look at SDWAN. a way that we can build a virtual wide area network topology on top of whatever physical wide area network topology we have today. We can eliminate unnecessary back hauling.We have security performance (QoS), and this can help us out tremendously, endlessly, in large topologies with lots and lots of routers. And another reason this is so important for today's networks is that the applications are moving out of the data centre into the cloud.
In this module, we've been talking about different network topologies. And there's one more I want to share with you before you wrap up this module. It's called a schedule. And that stands for supervisory control and data acquisition. and this technology. It's sometimes called ICS for industrial control systems. Now, SCADA itself is not a protocol; it's not like TCP or like IP. Skater provides us with the ability to control one system from another. Those are really the two parts we need. We've got some systems that we want to monitor. And that system might be an assembly line in a factory. It might be some sort of security system. There are lots of different things that we can monitor. And we have a second system that can control the first system. And for Network Plus purposes, I only need you to understand the basics of SCADA. and I thought I would give you a really simple example. So let's say that we have this pond as ourSkida system and we're wanting to monitor the water depth. Maybe when there's a heavy rain, the pond overflows. It does damage. It runs into the roadway. And what we want to do is have a pump to pump out the excess water if the pond gets too deep. That's what we can do using SCADA. Now the pond itself is the first system. That's what we want to monitor. And one SCADA component we need is a sensor. Now, the sensor is going to be a water level sensor. It's going to detect how deep the pond is and if the water level is rising. And depending on what we're monitoring, we could have a variety of sensors. Maybe we have a temperature sensor or we're sensing current flowing through an electrical cable. Maybe you have a motion sensor. But here we have a water level sensor. And based on what the sensor is telling us, we want to somehow control the first system, the pond. In our example, we want to be able to pump some of the water out if it gets too deep. And the control that's going to allow us to reduce the water level is a pump. That's another scathing component. We've got a sensor and a control, which in this case is a water pump. But if we're monitoring, let's say, temperature, the control system might be an air conditioning unit. And if the room gets too warm, the AC unit could cool it down. But SCADA needs another component to receive information from the sensor and then, when instructed to do so, send a signal out to the skater control. In this case, we need something to tell the water pump to kick on. If the water level sensor says, "Hey, we're getting a little too deep," and that component is called an RTU, or a remote telemetry unit and an RTU, it can receive information from a sensor. And when it needs to, it can send out signals to the skate of control, which again, in our case, is the water pump. We could tell it to start pumping that water out of the pond, and we might have several different ponds that we're trying to monitor. So it would be great if we could have a central component that we could use to talk to all of the SCADA controls out there. That component of a SCADA system is called a skate master. And the SCADA master is going to connect to the RTU using a communications network. And that's why this topic of SCADA is applicable to your network studies because you might be working in a Sketa environment where something needs to be monitored or controlled. And you should understand that we might have networking technologies as part of that SCADA implementation. For example, that link between the RTU and the SCADA master might be an Ethernet connection. It might be some sort of WAN link. And if this communications network is IP-based, you're going to be better able to use the skills you've learned in this course to troubleshoot that communications network. And with all of these pieces and parts in place, let's say that a rain cloud moves in and it starts to rain. The pond starts to fill up. What's going to happen? Well, the water level sensor is going to detect that the water level is rising, and it's going to report that to the RTU over that communications network. And the RTU is going to alert the SCADA master. And the SCADA master can then tell the RTU to send a signal to the waterpump to start pumping out the excess water. And that's a look at the pieces and parts that make up a SCADA implementation, also known as an Industrial Control System, or ICF.
ExamCollection provides the complete prep materials in vce files format which include CompTIA Network+ certification exam dumps, practice test questions and answers, video training course and study guide which help the exam candidates to pass the exams quickly. Fast updates to CompTIA Network+ certification exam dumps, practice test questions and accurate answers vce verified by industry experts are taken from the latest pool of questions.
CompTIA CompTIA Network+ Video Courses
Top CompTIA Certification Exams
SPECIAL OFFER: GET 10% OFF
Pass your Exam with ExamCollection's PREMIUM files!
SPECIAL OFFER: GET 10% OFF
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from email@example.com and follow the directions.
Download Free Demo of VCE Exam Simulator
Experience Avanset VCE Exam Simulator for yourself.
Simply submit your e-mail address below to get started with our interactive software demo of your free trial.